EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 180)

5. In the Video Transition GPI, specify a Start transition GPI and an End transition GPI, if
requested.
6. Click the Add button.
The transition effects are added to the beginning transitions of the elements that are
closest to the nowline and that are selected in the Track group box. The effects have
settings defined in the Transition Effect group box and GPIs defined on the video track, if
any.
In the given example, the result is as follows:
Note
To add the same transition effect than the last one without displaying the
Transition Effects dialog box, select the clip transition on which the effect should
be added and press SHIFT+ x.
How to Add Effects To Contiguous Elements
To add transition effects manually to contiguous elements in the timeline, proceed as
follows:
1. Place a mark IN and mark OUT to cover the transitions on which an effect needs to be
defined. For example:
168 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A