EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 33)

Display Mode
The user can select the timecode information to be displayed. The following display
modes are available when right-clicking the Timecode field. IPEdit supports the various
types of timecodes.
For more information on the timecode display mode, refer to the Control Panel chapter.
5.4.5. Train Name Field
This is the name of the last loaded record train.
5.4.6. Remaining Time / Capacity Field
Description
The Duration field will have a different meaning and display color according to the activity
being performed on the channel.
When a Clip is Loaded
The following table shows the possible colors and meanings of the Remaining Time /
Capacity field when a clip is loaded.
The Remaining Time / Capacity field value and color depends on:
• whether the clip is playing or paused
• the media position indicator
• the defined (mark) IN and (mark) OUT points:
◦ When no new mark IN and mark OUT have been defined after the clip has been
loaded, the values displayed are based on the original IN and OUT points of the
clip.
◦ When a new mark IN and/or mark OUT have been defined after the clip has been
loaded, the values displayed will be based on this new mark IN and/or mark OUT
point(s).
IPDirector - Version 6.00 - User Manual - IPEdit
5. Player 21