Table 21 protocol selection switch settings, Table 22 port 0 settings, Table 23 port 1 settings – Nortel Networks NN43001-301 User Manual
Page 81: Table 21
Set up the NT6D11AB, NT6D11AE, NT6D11AF DCHI
81
Table 21
Protocol selection switch settings
Protocol
Switch Setting
SW3.1
SW3.2
DPNSS1
0
0
ISDN
1
1
Valid switch combinations
The following are the only allowable switch setting combinations (not
including address switch settings).
Port 0
Port 0 can be configured as asynchronous ESDI, or disabled. If the port is
configured as disabled, it will not be visible to the system CPU. Refer to
Table 22 "Port 0 settings" (page 81)
.
Table 22
Port 0 settings
Mode
Switch setting
SW1.1
SW1.2
SW3.1
SW3.2
Asynchronous ESDI
1
0
0
0
Asynchronous ESDI
1
0
1
1
Port disabled
1
1
-
-
Port 1
The following are the only valid emulation mode combinations. If the port
is configured as disabled, it will not be visible to the system CPU. Refer to
Table 23 "Port 1 settings" (page 81)
.
Note: The ISDN emulation must be selected.
Table 23
Port 1 settings
Mode
Emulates
Switch setting
SW2.1
SW2.2
SW3.1
SW3.2
DPNSS1
NT5K35
0
0
0
0
ISDN
NT6D11
0
0
1
1
Expanded
DPNSS1
NT5K75
0
1
0
0
Port disabled
1
1
-
-
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.