Nt8d7205, Table 111 qcad133 wire list, Table 112 nt8d7205 wire list – Nortel Networks NN43001-301 User Manual
Page 299

NT8D7205
299
For cabinets without an I/O filter assembly, this cable transports the
T1 signal from the QPC720 PRI pack to the NCTE telephone company
interface.
•
Standard length - 50 ft (15.3 m)
•
Construction - Individually foil-shielded, twisted pairs, 24 AWG (0.511
mm), stranded
•
P1 Connector - 15-pin, female, subminiature D with jackscrews
•
P2 Connector - 15-pin, male, subminiature D, with slide-latch (optional
spring-latch loose-packed with cable assembly)
Table 111
QCAD133 wire list
Color
From
To
PRI signal
WHITE
P1-1
P2-1
XTIP (transmit tip) to
telephone company
BLACK
P1-9
P2-9
XRING (transmit ring) to
telephone company
GRN SHLD
P1-2
nc
GND (ground)
RED
P1-3
P2-3
RTIP (receive tip) from
telephone company
BLACK
P1-11
P2-11
RRING (receive ring) from
telephone company
RED SHLD
P1-4
nc
GND (ground)
NT8D7205
This cable is used to transport the 2Mb digital signal from the I/O panel
at the cabinet bulkhead to the Network Channel Terminating Equipment
(NCTE) telephone company interface.
•
Standard length - 15.3 m (50 ft.)
•
Construction - Individually foil-shielded, twisted pairs, 24 AWG (0.511
mm), stranded
•
P1 Connector - 9-pin, female, subminiature D with jackscrews
•
P2 Connector - 9-pin, male, subminiature D, with jack screws
Table 112
NT8D7205 wire list
Color
From
(pack end)
To
(I/O end)
Signal
White
P1-6
P2-6
XTIP (transmit)
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.