Nortel Networks NN43001-301 User Manual
Page 245
DTI software implementation
245
Prompt
Response
Description
N
If CAS(S) not required.
CLRF(R)
abcd
Clear forward (receive).
N
If CLRF(R) not required.
SOSI
abcd
(N)
Special operator signal defined.
Undefined. Prompted when OPRC = N.
Outgoing Calls:
SEZA(S)
abcd
Seize acknowledgement
SEZD(S)
abcd
Seize acknowledgement and (send) data signal.
N
If SEZD(S) not required.
SEZV(S)
abcd
Seize acknowledgement and (send) voice signal. Only
recommended for Meridian to M-1 applications.
TIME
xxx yyy
Minimum and maximum time range for OPRS(R) in milliseconds.
xxx = 8-(48)-2040
yyy = xxx-(128)-2040
N
If SEZV(S) not required.
SEZA(R)
abcd
Seize acknowledgment (receive) signal.
N
If SEZA(R) not required.
P WNKS(R)
abcd
Wink start pulsed seize acknowledgment (receive) signal.
N
If P WNKS(R) not required.
TIME
20-(140)-500,
20-(290)-500
Minimum and maximum length of WNKS(R) pulse in
milliseconds.
P EOS(R)
abcd
End of selection (receive) signal.
N
If EOS(R) not required.
TIME
(64)-320
64-(256)-320
Length of EOS(R) pulse stored in multiples of 8 milliseconds.
CONN(S)
abcd
Connect send.
CONN(R)
abcd
Connect receive.
P OPRC(R)
abcd
Operator recall signal for special services. minimum three
pulses of 160 milliseconds each.
N
If OPRC(R) not required.
P BURS(S)
abcd
Bring up receiver (send) for L1 networking.
N
If BURS(S) not required.
P BURS(R)
abcd
Bring up receiver (receive) for L1 networking.
N
If BURS(R) not required.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.