Ld 16 - configuring a dti trunk – Nortel Networks NN43001-301 User Manual
Page 224

224
1.5 Mb DTI implementation
4
Assign clock’s reference source. See
—End—
LD 17 - Adding a DTI card
Prompt
Response
Description
REQ
CHG
Change existing data.
TYPE
CFN
Configuration data block.
...
PARM
YES
...
PCML
(MU) A
System PCM law.
Default is MU law.
...
CEQU
YES
Changes to common equipment.
DLOP
ll dd ff
Digital Trunk Interface Loop or Loops
MODE
TRK
Select Digital Trunk Interface mode.
TMDI
(YES) NO
Whether the card is a TMDI card.
YALM
DG2 (FDL)
Yellow alarm method — prompted only if the frame format
is ESF — Must match the far end.
Use FDL with ESF and use DG2 with non-ESF. If not
prompted then DG2 is set automatically.
TRSH
0-15
The maintenance and threshold table to be used for this
DTI card, as configured in LD 73.
T1TE
0 1 2
T1 Transmit Equalization (0=0-200 ft., 1=200-400 ft,
2=400-700 ft). Only for TMDI = YES.
LD 16 - Configuring a DTI trunk route
Prompt
Response
Description
REQ
NEW
CHG
Add new data.
Change existing data.
TYPE
RDB
Route data block.
TKTP
Create a trunk route.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.