Nortel Networks NN43001-301 User Manual
Page 237
237
2.0 Mb DTI implementation
Contents
This section contains information on the following topics:
"Hardware requirements" (page 237)
"NTAK10 2.0 Mb DTI card" (page 238)
"Install DTI hardware" (page 238)
"DTI software implementation" (page 241)
Overview
This chapter provides the information required to install the 2.0 Mb Digital
Trunk Interface (DTI) card in a system. It includes information for:
•
hardware installation
•
software implementation
Hardware requirements
Hardware requirements for 2.0 Mb DTI are as follows:
•
2.0 Mb DTI Circuit card - NTAK10
(a Clock Controller is incorporated into the circuit card)
•
CEPT Cable – NTBK05DA (120
3
/
4
twisted pair – 6.15 m length)
•
CEPT Cable – NTBK05CA (75
3
/
4
coaxial – 6.15 m length)
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.