Nortel Networks NN43001-301 - Manual (Page 27)

NT8D72 PRI2 27
Faceplate Destination Type Description
RCV MON Miniature bantam jack Monitor DSI from network
XMT MON Miniature bantam jack Monitor DSI from PRI
Cable requirements
Table 3 "NT8D72AB and NT8D72BA PRI: Cables and cable lengths" (page
27)
lists the types of cable used and the lengths required for internal and
external NT8D72 PRI2 connections.
Note: No additional cabling is required for nB+D configurations. Multiple
PRIs and the D-Channel are associated at the PRI prompt in LD 17.
Table 3
NT8D72AB and NT8D72BA PRI: Cables and cable lengths
Cable Type From To
Maximum length
(meters)
NT8D79AA PRI card Clock controller (CC-0) 2.13
NT8D79AA PRI card Clock controller (CC-1) 2.13
QCAD328A PRI card DCH card 1.8
QCAD328B PRI card DCH card 5.5
QCAD328C PRI card DCH card 10.67
QCAD328D PRI card DCH card 15.24
NTND26AA PRI card MSDL 1.8
NTND26AB PRI card MSDL 5.5
NTND26AC PRI card MSDL 10.67
NTND26AD PRI card MSDL 15.24
NT8D85AB PRI card Network Network Card 15.24
RS-232 PRI card Echo canceller 15.24
NT8D7207 PRI card I/O panel 3.05
NT8D7205 I/O panel crossconnect 15.24
Carrier interface
The NT8D72 PRI2 provides an interface to the 2Mb external digital
line either directly or through an office repeater, echo canceller or line
terminating unit (LTU).
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.