Nortel Networks NN43001-301 - Manual (Page 234)

234 1.5 Mb ISL implementation
Prompt Response Description
TRSH 0-15 Assign a threshold set or table.
RALM 1-(3)-128 Yellow alarm 24-hour threshold.
BIPC 1-(2)-128 24-hour bit rate violation threshold.
LFAC 1-(3)-128 24-hour loss of frame alignment threshold.
BIPV 1-(3)-4
1-(2)-4 Bit rate (bipolar violation and CRC) monitoring limits for
maintenance and out-of-service thresholds.
SRTK 1-(5)-24
1-(30)-3600 Frame slip-tracking-monitoring limits (in hours).
SRNT 1-(15)1024
1-(3)-1024 Non-tracking slip-rate monitoring maintenance and
out-of-service thresholds.
LFAL 1-(17)-10240
1-(511)-10240 Loss of frame alignment monitoring limits.
SRIM (1)-127 Slip rate improvement timer.
SRMM 1-(2)-127 Maximum number of times the slip rate exceeds the
maintenance limit.
LD 15 - Enabling ISDN option
Prompt Response Description
REQ: NEW CHG Add new data. Change existing data.
TYPE: NET Networking data.
CUST 0-99 Customer number Range for Large System, Call Server
1000E, and Media Gateway 1000E
0-31 Range for Small System, Media Gateway 1000B
ISDN YES Customer is equipped with ISDN.
PNI 1-32700 Customer private network identifier. This number MUST be
unique to this customer in the private network. It is used to
as part of the setup message for feature operation such as
Network Ring Again and Network ACD.
HNPA NPA Telephone area code for this system. Sent as part of setup
message as calling line identification.
HNXX NXX Telephone local exchange code for this system. Sent as
part of setup message as calling line identification.
HLOC XXX Home location code (NARS).
LSC 1-9999 One to four digit Local Steering Code established in the
Coordinated Dialing Plan (CDP). The LSC prompt is
required for Calling Line I.D. and Network ACD.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.