ATL Telecom R1-SW Ethernet Switch User Manual

Page 71

Text mode
Original mode

Basic Configuration

5-3

4. Enter the login ID and press the [Enter]. The default login ID is ‘

corecess

’. If you entered the

Password:

Last login: Wed Feb 25 14:28:13 on console

localhost>

5. To configure the Corecess R1-SW24L2B, enter the ‘Privileged’ mode by enable command.

If you enter Privileged mode, the prompt is changed from localhost> to localhost#.

localhost> enable

localhost#

Note: After specifying the IP address of the NMS port(Management interface), you can access the Corecess R1-
SW24L2B CLI through the Telnet session or NMS.