ATL Telecom R1-SW Ethernet Switch - Manual (Page 228)

R1-SW24L2B User’s Manual
10-18
CIFS (Cognitive Information Filtering System)
You can filter the particular class of traffic by using the QoS policy supported by the Corecess
R1-SW24L2B.
The following is the steps for configure filtering policy on the Corecess R1-SW24L2B.
1.
Creating Classes
Create a class map and define the classification criteria for the class map.
2.
Creating a Policy
Create a policy map, specify the class to which the policy map applies, and define the actions
that you want the system to take for the particular class of traffic.
3.
Applying the Service Policy
Apply the policy map to both inbound and outbound traffics on the system.
This section describes how to create a QoS service policy according to the above steps.
Note : For more detail information about QoS (Quaility of Service), refer to the Chapter 9/ Configuring QoS
in this manual..