ATL Telecom R1-SW Ethernet Switch - Manual (Page 148)

R1-SW24L2B User’s Manual
8-14
The table below describes the fields shown by the show snmp-server command:
Table 8-9 show snmp-server field descriptions
Field Description Default
RMON
Status of whether RMON is enabled or
disabled
enabled
Extended RMON
Status of whether extended RMON is enabled
or disabled
not supported
sysContact SNMP system contact string unknown
sysLocation SNMP system location string unknown
Community-Access
Configured SNMP communities
- read-only
- read-write
community
Community-String
SNMP community strings associated with each
SNMP community
none
Trap-Rec-Address
IP address of trap receiver hosts and UDP port
number for sending trap messages.
Version SNMP version of trap host
TrapReceive
r
Trap-Rec-Community
SNMP community string used for trap messages
to the trap receiver.
Traps Trap types
Trap
Enabled
Status of whether trap type is enabled or
disabled
disabled