ATL Telecom R1-SW Ethernet Switch - Manual (Page 141)

Configuring SNMP and RMON
8-7
The following is an example of setting the system contact information and system location
information:
Parameter Value
System contact information Dial System Administrator at phone #2734
System location information 1st_floor lab
# configure terminal
(config)# snmp-server contact Dial System Administrator at phone #2734
(config)# snmp-server location 1st_floor lab
(config)# end
# show snmp-server
RMON: Enabled
Extended RMON: Extended RMON module is not present
sysContact Dial Operator at phone
sysLocation 1st_floor_lab
:
# write memory
Building Configuration...
[OK]
#