ATL Telecom R1-SW Ethernet Switch - Manual (Page 218)

R1-SW24L2B User’s Manual
10-8
The following example shows how to define an access list which permit the access from hosts in
the specified network:
# configure terminal
(config)# access-list 1 permit 192.5.34.0 0.0.0.255
(config)# access-list 1 permit 128.88.0.0 0.0.255.255
(config)# access-list 1 permit 36.0.0.0 0.255.255.255
(config)# end
# show access-list
Standard IP access list 1
permit 192.5.34.0, wildcard bits 0.0.0.255
permit 128.88.0.0, wildcard bits 0.0.255.255
permit 36.0.0.0, wildcard bits 0.255.255.255
#
The following example shows how to define an access list which deny the access from the
specified host:
# config t
(config)# access-list 2 deny host 171.69.198.102
(config)# access-list 2 permit any
(config)# end
# show access-list
Standard IP access list 2
deny 171.69.198.102
permit any
#