ATL Telecom R1-SW Ethernet Switch - Manual (Page 51)

Before Installaion
3-9
Installation Place
Environmental Requirements
For the safe installation and use of the Corecess R1-SW24L2B, the place for installation should
satisfy the following requirements:
y While or after installing the product, keep the product clean all the time.
y The system should be installed in a cool place where has no direct ray of sunlight. Any tool
or equipment should not be place on the way of passage.
y The following ambience condition for temperature and humidity should always be kept.
Table 3-2 Temperature and humidity condition
Operating Temperature -20 ~ 60℃
Storage Temperature -30 ~ 75℃
Operating Humidity 10 ~ 95% (40℃, non-condensing)
Power Supply
y The Corecess R1-SW24L2B should be installed in the place where power supply satisfying
the following condition is provided.
Table 3-3 Power condition
Feature AC
Input Voltage Rating 100 ~ 240VAC
Operating Range 88 ~ 264VAC
Frequency 50/60Hz
y Verify the power (source) be clean. If there is too much noise or spark, it is better to have the
power control equipment.
y Locate an electric outlet near the system for easy installation of power cable.
y Be careful with connecting power supply equipment and avoiding overload wiring.