ATL Telecom R1-SW Ethernet Switch - Manual (Page 103)

Basic Configuration
5-35
To configure the types and level of the events, use the following command in Global
configuration mode.
Table 5-22 Configuring event level
Command Task
logging level
1. Configure the event types and level to save.
y : Type of event to configure the level.
y : Level of event (1 ~ 8). Default setting is 6.
end
2. Return to Privileged mode.
show logging
3. Verify the configuration.
write memory
4. Save the changed configuration.
The following example configures the sys events of the lower levels (Emergency, Alert, Critical,
and Errors) than ’ Errors ’ level (level 4) to be stored in the system log file:
# configure terminal
(config) # logging level sys 4
(config) # end
# show logging
onsole logging is disable
logging buffer is enable
logging file is disable
logging buffer size is 128 kbytes
Facility Default Severity Current Severity
----------- ------------------ ------------------
sys 6 4(*)
filesys 6 6
authorize 6 6
.
.
# write memory
Building Configuration...
[OK]
#