ATL Telecom R1-SW Ethernet Switch - Manual (Page 192)

R1-SW24L2B User’s Manual
9-24
Policy : priority 7
#
You can delete a policy-map using the no policy-map command in the QoS configuration
mode. This example shows how to delete a policy-map:
(config)# qos
(config-qos)# no policy-map TEST
(config-qos)#
You can remove a class-map from the policy-map, using the no class command in the
policy-map configuration mode. The no class command does not delete the class-map but
disconnects the relation between the policy-map and the class-map. To delete a class-map, use
the no class-map command in the QoS configuration mode. This example shows how to
remove a class-map from the policy-map and verify the result:
(config)# qos
(config-qos)# policy-map polmap6
(config-pmap)# no class class1
(config-pmap)# end
# show policy-map
Policy-map polmap6
#