ATL Telecom R1-SW Ethernet Switch - Manual (Page 156)

R1-SW24L2B User’s Manual
8-22
The following is an example of configuring a history group:
# configure terminal
(config)# rmon historycontrol 1 gigabitethernet 1/1 owner aaa 50 30
(config)# end
# show rmon
RMON: Enabled
Extended RMON: Extended RMON module is not present
[statistics]
index status dataSource
----- -------------- -----------------------------
[history]
index status dataSource
----- -------------- -----------------------------
1 valid ifIndex.1 (Gi 1/1)
.
.
#
To display the detail information on a history group, enter the show rmon history
command with the history number:
# show rmon history 1
Entry 1 is valid, and owned by aaa
Monitors ifEntry.ifIndex.1 every 10 seconds
Requested # of time intervals, is buckets, is 10
Granted # of time intervals, is buckets, is 10
Sample # 6878 began measuring at 1days 18h:5m:52s:44th(15155244)
Received 0 octets, 0 packets,
0 broadcast and 0 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions.
# of dropped packet events is 0
Network utilization is estimated at 0
.
.
.