ATL Telecom R1-SW Ethernet Switch - Manual (Page 165)

Configuring SNMP and RMON
8-31
Displaying RMON Information
To display the current RMON configuration, enter the show rmon command in Privileged
mode. You can execute the show rmon command with the following options:
y alarm Displays the RMON alarm table.
y events Displays the RMON event table.
y history Displays the RMON history table.
y statistics Displays the RMON statistics table.
If you do not specify any option,
the contents of the RMON alarm table, event table, history table, and
statistics table are displayed. The following is a sample output of the show rmon command:
# show rmon
RMON: Enabled
Extended RMON: Extended RMON module is not present
[statistics]
index status dataSource
----- -------------- -----------------------------
1 valid ifIndex.1 (Gi 1/1)
[history]
index status dataSource
----- -------------- -----------------------------
1 valid ifIndex.1 (Gi 1/1)
[alarm]
index status sample
----- -------------- -----------------------------
1 valid etherStatsPkts.1
[event]
index status type
----- -------------- ---------------
10 valid logandtrap
#