ATL Telecom R1-SW Ethernet Switch User Manual
Page 122
R1-SW24L2B User’s Manual
6-10
Field
Description
RSTP Edge
RSTP status of the port (enable, disable).
Trap
Whether to enable displaying trap messages of the VDSL port (enable,
disable).
LinkAgg.
LACP status of the port (on, off).
Admin Speed
Maximum speed of the port.
Limited Speed
Limited speed of the port.
Active Speed
Current speed of the port.
If Index
Interface number of the port.
Logical ID
Logical ID of the port.
All
Total number of the incoming packets on the port.
Unicast
Total number of the incoming unicast packets on the port.
Multicast
Total number of the incoming multicast packets on the port.
Broadcast
Total number of the incoming broadcast packets on the port.
Discard
Number of the incoming packets discarded on the port.
in
Error
Number of the incoming packets with errors on the port.
All
Total number of the outgoing packets on the port.
Unicast
Total number of the outgoing packets on the port.
Multicast
Total number of the outgoing packets on the port.
Broadcast
Total number of the outgoing packets on the port.
Discard
Total number of the outgoing packets on the port.
out
Error
Total number of the outgoing packets on the port.
runt
Number of frames received without Start of Frame Delimiter detection but
with carrier assertion.
shortCRC
Number of frames less than 64 bytes in length, received with CRC error.
normalCRC
Number of frames with lengths between 64 bytes and the maximum frame
size, received with an integral number of bytes and a CRC error.
nomalAlign
Number of frames with lengths between 64 bytes and the maximum frame
size, received with a non integral number of bytes and a CRC error.
input
longCRC
Number of frames, larger then the maximum frame size, received with a CRC
error.
output
eferred
Number of frames deferred at the first transmit attempt due to a busy line in
half duplex mode.