ATL Telecom R1-SW Ethernet Switch - Manual (Page 50)

R1-SW24L2B User’s Manual
3-8
Lifting the System
When you lift the product to move or change the installation place, note the following
guidelines.
y
Disconnect all power and external cables before lifting the system.
y Ensure that your footing is solid and the weight of the system is evenly distributed between
your feet.
y Lift the system slowly, keeping your back straight. Lift with your legs, not with your back.
Bend at the knees, not at the waist.
y Do not attempt to lift the system with the handles on the power supplies or on any of the
cards. These handles are not designed to support the weight of the system.
y To lift and move the system, following number of people or a crane should be needed
depends on weight of the system:
Table 3-1 The Number of Required Person to Lift The System
Weight of the
System
The Number of
Required Persons
Below 18Kg 1
18~32Kg 2
32~55Kg 3
Above 55Kg Crane
Disposing of the System
Dispose of the system and its components (including batteries) as specified by all national laws
and regulations.