ATL Telecom R1-SW Ethernet Switch - Manual (Page 109)

Basic Configuration
5-41
Displaying Contents of Log File
To display the contents of the log file, use the following command in Privileged mode:
Table 5-27 Displaying contents of log file
Command Task
show logging buffer
1. Display the log messages saved in the log file.
y : Number of log messages to display.
The following is a sample output of the show logging buffer command:
# show logging buffer 10
Nov 14 10:06:58 localhost VLAN-6-VLAN_CREATED: vlan [1] is created
Nov 14 10:07:09 localhost SYS-6-SYS_MODULE: module [1] is inserted
Nov 14 10:07:09 localhost SYS-6-SYS_MODULE: module [2] is inserted
Nov 14 10:07:09 localhost SNMP-5-COLDSTART: Cold Start
Nov 14 10:07:10 localhost PORT-6-LINK_CHANGE: 1/1: ifIndex 1 Link Up (Up)
Nov 14 10:07:32 localhost AUTHORIZE-6-LOGIN: login corecess authentication
service(login) tty(/cinitrd/dev/console) from (local)
Nov 14 10:07:33 localhost AUTHORIZE-6-USER_LOGIN: corecess login from
/cinitrd/dev/console
#
The following table describes the fields shown by the show logging buffer command:
Nov 24 13:49:56 CCR1AD AUTHORIZE-6-USER_LOGIN: root login from /dev/console
No Description
n Date and time that the event occurred (month date hour:minute:second)
o System name
r The brief description of the event in brief.
n o p