H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 639)

63-2
To do… Use the command… Remarks
In system view
apply poe-profile profile-name
interface interface-type
interface-number
[ to interface-type
interface-number ]
Enter
Ethernet
port view
interface interface-type
interface-number
Apply the
existing PoE
profile to the
specified
Ethernet port
In Ethernet
port view
Apply the
existing
PoE
profile to
the port
apply poe-profile profile-name
Use either approach.
Note the following during the configuration:
1) When the apply poe-profile command is used to apply a PoE profile to a port, some PoE features
in the PoE profile can be applied successfully while some cannot. PoE profiles are applied to the
devices according to the following rules:
z
When the apply poe-profile command is used to apply a PoE profile to a port, the PoE profile is
applied successfully only if one PoE feature in the PoE profile is applied properly. When the
display current-configuration
command is used for query, it is displayed that the PoE profile is
applied properly to the port.
z
If one or more features in the PoE profile are not applied properly on a port, the device will prompt
explicitly which PoE features in the PoE profile are not applied properly on which ports.
z
The display current-configuration command can be used to query which PoE profile is applied to
a port. However, the command cannot be used to query which PoE features in a PoE profiles are
applied successfully.
2) PoE profile configuration is a global configuration, and applies synchronously in the intelligent
resilient framework (IRF) system.
3) Combination of Unit creates a new Fabric. In the newly created Fabric, the PoE profile
configuration of the Unit with the smallest Unit ID number will become the PoE profile configuration
for the Fabric currently in use.
4) Split of Fabric results in many new Fabrics. In each newly created Fabric, the PoE profile
configuration of each Unit remains the same as it was before the split.
Displaying and Maintaining PoE Profile Configuration
To do… Use the command… Remarks
Display the detailed information
about the PoE profiles created on
the device
display poe-profile { all-profile |
interface interface-type
interface-number | name
profile-name }
Available in any view