H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 490)

46-18
Open an SSH connection with password authentication
From the window shown in Figure 47-9 , click Open. The following SSH client interface appears. If the
connection is normal, you will be prompted to enter the username and password, as shown in Figure
47-11 .
Figure 47-11 SSH client interface (2)
Enter the username and password to establish an SSH connection.
To log out, enter the quit command.
Configuring the SSH Client on an SSH2-Capable Device
Complete the following tasks to configure SSH client on an SSH2-capable device:
Task Remarks
Configure whether first-time authentication is supported Optional
Establish the connection between the SSH client and server Required
Configure whether first-time authentication is supported
When the device connects to the SSH server as an SSH client, you can configure whether the device
supports first-time authentication.
z
First-time authentication means that when the SSH client accesses the server for the first time and
is not configured with the server host public key, the user can continue accessing the server, and
will save the host public key on the client for use in subsequent authentications.
z
When first-time authentication is not supported, a client, if not configured with the server host public
key, will be denied of access to the server. To access the server, a user must configure in advance
the server host public key locally and specify the public key name for authentication.
Follow these steps to enable the device to support first-time authentication: