H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 555
52-2
Connected to OAP!
Trying ...
Press CTRL+K to abort
Connected.
220 3Com 3CDaemon FTP Server Version 2.0
User(none):admin
331 User name ok, need password
Password:
230 User logged in
[ftp]get config.cfg config.cfg
227 Entering passive mode (192,168,0,100,5,95)
125 Using existing data connection
..........226 Closing data connection; File transfer successful.
FTP: 7590 byte(s) received in 15.139 second(s) 501.00 byte(s)/sec.
[ftp] bye
When using different FTP server software on PC, different information will be output to the device.
Step 2: Update the host configuration file on Switch.
Please wait........................................Done!
Step 3: Restart Switch.
Before restarting Switch, make sure you have saved all other configurations that you want, so as to
avoid losing configuration information.
Loading procedure using FTP server
As shown in
, Switch is used as the FTP server. You can telnet to Switch, and then execute
the FTP commands to upload the configuration file config.cfg to Switch.