H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 547)

51-11
To do… Use the command… Remarks
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable system information output
to a log host
info-center loghost host -ip-addr
[ channel { channel-number |
channel
-name } | facility
local -number ]*
Required
By default, the device does not
output information to the log host.
After you configure the device to
output information to the log host,
the device uses information
channel 2 by default.
Configure the source interface
through which log information is
sent to the log host
info-center loghost source
interface-type interface-number
Optional
By default, no source interface is
configured, and the system
automatically selects an interface
as the source interface.
Configure the output rules of
system information
info -center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity
| state state } ]*
Optional
Refer to
Table 51-4 for the default
output rules of system information.
Set the format of the time stamp to
be sent to the log host info-center timestamp loghost
{ date | no-year-date | none }
Optional
By default, the time stamp format
of the information output to the log
host is date.
Be sure to set the correct IP address when using the info-center loghost command. A loopback IP
address will cause an error message prompting that this address is invalid.
Setting to Output System Information to the Trap Buffer
Follow these steps to set to output system information to the trap buffer:
To do… Use the command… Remarks
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable system information output
to the trap buffer
info-center trapbuffer [ channel
{ channel-number | channel-name }
| size buffersize ]*
Optional
By default, the device uses
information channel 3 to output
trap information to the trap buffer,
which can holds up to 256 items by
default.