H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 49)

1-9
Scenario
Authentication
mode
User type Command
Command
level
The user privilege level level command is not
executed, and the service-type command
specifies the available command level.
Determined by
the
service-type
command
The user privilege level level command is
executed, and the service-type command does
not specify the available command level.
Level 0
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
Determined by
the
service-type
command
The user privilege level level command is not
executed, and the service-type command does
not specify the available command level.
The user privilege level level command is not
executed, and the service-type command
specifies the available command level.
Level 0
The user privilege level level command is
executed, and the service-type command does
not specify the available command level.
VTY users that are
authenticated in
the RSA mode of
SSH
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
Determined by
the user
privilege level
level command
The user privilege level level command is not
executed, and the service-type command does
not specify the available command level.
Level 0
The user privilege level level command is not
executed, and the service-type command
specifies the available command level.
Determined by
the
service-type
command
The user privilege level level command is
executed, and the service-type command does
not specify the available command level.
Level 0
VTY users that are
authenticated in
the password
mode of SSH
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
Determined by
the
service-type
command
Refer to AAA and SSH in H3C WX3000 Series Unified Switches Switching Engine Configuration Guide
for information about AAA, RADIUS, and SSH.