45 common multicast configuration, Common multicast configuration, Configuring a multicast mac address entry – H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 450: Configuring a multicast mac address entry -1
45-1
45
Common Multicast Configuration
Common Multicast Configuration
Configuring a Multicast MAC Address Entry
In Layer 2 multicast, the system can add multicast forwarding entries dynamically through a Layer 2
multicast protocol. Alternatively, you can statically bind a port to a multicast MAC address entry by
configuring a multicast MAC address entry manually.
Generally, when receiving a multicast packet for a multicast group not yet registered on the device, the
device will flood the packet within the VLAN to which the port belongs. You can configure a static
multicast MAC address entry to avoid this.
Follow these steps to configure a multicast MAC address entry in system view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a multicast MAC address
entry
mac-address multicast
mac-address
interface
interface-list vlan
vlan-id
Required
The mac-address argument must be
a multicast MAC address.
Follow these steps to configure a multicast MAC address entry in Ethernet port view:
To do…
Use the command…
Remarks
Enter system view
system
-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Create a multicast MAC address
entry.
mac
-address multicast
mac-address
vlan vlan-id
Required
The mac-address argument must be
a multicast MAC address.
z
If the multicast MAC address entry to be created already exists, the system gives you a prompt.
z
If you want to add a port to a multicast MAC address entry created through the mac-address
multicast
command, you need to remove the entry first, create this entry again, and then add the
specified port to the forwarding ports of this entry.
z
You cannot enable link aggregation on a port on which you have configured a multicast MAC
address, and you cannot configure a multicast MAC address on an aggregation port.
z
You cannot configure a multicast MAC address starting with 01005e in an
IGMP-Snooping-enabled VLAN. You can do that if IGMP Snooping is not enabled in the VLAN.