H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 594)

58-15
To do… Use the command… Remarks
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be
executed in any view.
Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails. You can
specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation- tag
Required
By default, no test group is
configured.
Enable the HWPing client to send
Trap messages send-trap { all | { probefailure |
testcomplete | testfailure }* }
Required
By default, Trap sending is
disabled.
Configure the number of
consecutive unsuccessful HWPing
tests before Trap output
test-failtimes times
Optional
By default, Trap messages are
sent each time a test fails.
Configure the number of
consecutive unsuccessful HWPing
probes before Trap output
probe-failtimes times
Optional
By default, Trap messages are
sent each time a probe fails.
Displaying and Maintaining HWPing
To do… Use the command… Remarks
Display test history
display hwping history [ administrator-name
operation-tag ]
Display the results of the latest test
display hwping results [ administrator-name
operation-tag ]
Available in any view