H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 591)

58-12
To do… Use the command… Remarks
Configure the destination address destination-ip ip-address
Required
This IP address and the one
configured on the HWPing server
for listening services must be the
same.
By default, no destination address
is configured.
Configure the destination port
destination-port
port-number
Required in a Tcpprivate test
A Tcppublic test is a TCP
connection test on port 7. Use the
hwping-server tcpconnect
ip-address 7 command on the
server to configure the listening
service port; otherwise the test will
fail. No port number needs to be
configured on the client; any
destination port number configured
on the client will not take effect.
By default, no destination port
number is configured.
Configure the source IP address source-ip ip-address
Optional
By default, the source IP address is
not specified.
Configure the source port source-port port-number
Optional
By default, no source port is
specified.
Configure the test type
test-type { tcpprivate |
tcppublic }
Required
By default, the test type is ICMP.
Configure the number of probes
per test
count times
Optional
By default, one probe is made per
time.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time timeout time
Optional
By default, a probe times out in
three seconds.
Configure the maximum number of
history records that can be saved
history-records number
Optional
By default, the maximum number is
50.
Configure the type of service tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be
executed in any view.
8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client: