H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 590)

58-11
To do… Use the command… Remarks
Configure the destination IP
address
destination-ip ip-address
Required
By default, no destination address
is configured.
Configure the source IP address source-ip ip-address
Optional
By default, no source IP address is
configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the test type test-type snmpquery
Required
By default, the test type is ICMP.
Configure the number of probes
per test
count times
Optional
By default, each test makes one
probe.
Configure the maximum number of
history records that can be saved
history-records number
Optional
By default, the maximum number is
50.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in
any view.
7) Configuring TCP test on HWPing client
Follow these steps to configure TCP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation- tag
Required
By default, no test group is
configured.