H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 588)

58-9
To do… Use the command… Remarks
Configure the maximum number of
history records that can be saved
history-records number
Optional
By default, the maximum number is
50.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service tos value
Optional
By default, the service type is zero.
Configure the type of HTTP
operation
http-operation { get | post }
Optional
By default, the type of HTTP
operation is get, that is, the HTTP
operation will get data from the
HTTP server.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in
any view.
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the destination IP
address
destination-ip ip-address
Required
The destination address must be
the IP address of a UDP listening
service on the HWPing server.
By default, no destination address
is configured.
Configure the destination port
destination-port
Port-number
Required
The destination port must be the
port of a UDP listening service on
the HWPing server.
By default, no destination port is
configured.
Configure the source IP address source-ip ip-address
Optional
By default, no source IP address is
configured.