H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 140)

17-2
z
When a member port of an aggregation group is added to an isolation group, the other ports in the
same aggregation group are added to the isolation group automatically.
z
When a member port of an aggregation group is deleted from an isolation group, the other ports in
the same aggregation group are deleted from the isolation group automatically.
Displaying and Maintaining Port Isolation
To do… Use the command… Remarks
Display the information about the
Ethernet ports added to the
isolation group.
display isolate port Available in any view
Port Isolation Configuration Example
Network requirements
As shown in Figure 17-1 :
z
PC 2, PC 3 and PC 4 are connected to GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and
GigabitEthernet 1/0/4.
z
The switch connects to the Internet through GigabitEthernet 1/0/1.
z
It is desired that PC 2, PC 3 and PC 4 cannot communicate with each other.
Figure 17-1 Network diagram for port isolation configuration
Internet
PC2 PC3 PC4
Switch
Internet
GE1/0/2 GE1/0/4
GE1/0/1
PC2 PC3 PC4
GE1/0/3
Internet
PC2 PC3 PC4
Switch
Internet
GE1/0/2 GE1/0/4
GE1/0/1
PC2 PC3 PC4
GE1/0/3