H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 589

58-10
To do…
Use the command…
Remarks
Configure the source port
source-port port-number
Optional
By default, no source port is
configured.
Configure the test type
test-type jitter
Required
By default, the test type is ICMP.
Configure the number of probes
per test
count
times
Optional
By default, each test makes one
probe.
Configure the maximum number of
history records that can be saved
history-records
number
Optional
By default, the maximum number is
50.
Configure the packet size
datasize
size
Optional
By default, the packet size is 68
bytes.
Configure the automatic test
interval
frequency
interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time
timeout
time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
tos value
Optional
By default, the service type is zero.
Configure the number of test
packets that will be sent in each
jitter probe
jitter-packetnum
number
Optional
By default, each jitter probe will
send 10 packets.
Configure the interval to send test
packets in the jitter test
jitter-interval interval
Optional
By default, the interval is 20
milliseconds.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in
any view.
6) Configuring SNMP test on HWPing client
Follow these steps to configure SNMP test on HWPing client:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the HWPing client function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view
hwping
administrator-name
operation-tag
Required
By default, no test group is
configured.