H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 584)

58-5
To do… Use the command… Remarks
Enable the HWPing server function hwping-server enable
Required
Disabled by default.
Configure a UDP listening service
hwping-server udpecho
ip-address port-num
Required for UDP and jitter tests
By default, no UDP listening
service is configured.
Configure a TCP listening service
hwping-server tcpconnect
ip-address port-num
Required for TCP tests
By default, no TCP listening
service is configured.
HWPing Client Configuration
HWPing client configuration
After HWPing client is enabled, you can create multiple test groups for different tests, without the need
to enable HWPing client repeatedly for each test group.
Different types of HWPing tests are somewhat different in parameters and parameter ranges. The
following text describes the configuration on HWPing client for different test types.
1) Configuring ICMP test on HWPing client
Follow these steps to configure ICMP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the destination IP
address
destination-ip ip-address
Required
By default, no destination address
is configured.
Configure the source IP address source-ip ip-address
Optional
By default, no source IP address is
configured.
Configure the test type test-type icmp
Optional
By default, the test type is ICMP.
Configure the number of probes
per test
count times
Optional
By default, each test makes one
probe.
Configure the packet size datasize size
Optional
By default, the packet size is 56
bytes.
Configure the maximum number of
history records that can be saved
history-records number
Optional
By default, the maximum number is
50.