H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 548)

51-12
To do… Use the command… Remarks
Configure the output rules of
system information
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity
| state state } ]*
Optional
Refer to
Table 51-4 for the default
output rules of system information.
Set the format of time stamp in the
output information
info-center timestamp { log | trap
| debugging } { boot | date |
none
}
Optional
By default, the time stamp format
of the output trap information is
date
.
Setting to Output System Information to the Log Buffer
Follow these steps to set to output system information to the log buffer:
To do… Use the command… Remarks
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable information output to the
log buffer
info-center logbuffer [ channel
{ channel-number | channel-name }
| size buffersize ]*
Optional
By default, the device uses
information channel 4 to output log
information to the log buffer, which
can holds up to 512 items by
default.
Configure the output rules of
system information
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity
| state state } ]*
Optional
Refer to
Table 51-4 for the default
output rules of system information.
Set the format of time stamp in the
output information
info-center timestamp { log | trap
| debugging } { boot | date |
none
}
Optional
By default, the time stamp format
of the output log information is
date
.
Setting to Output System Information to the SNMP NMS
Follow these steps to set to output system information to the SNMP NMS:
To do… Use the command… Remarks
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable information output to the
SNMP NMS info-center snmp channel
{ channel-number | channel-name }
Optional
By default, the device outputs trap
information to SNMP through
channel 5.