Collecting/clearing traffic statistics – H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 371
37-27
6 : sp 0
7 : sp 0
Collecting/Clearing Traffic Statistics
for information about traffic accounting.
Configuration prerequisites
The ACL rules for traffic classification are defined. Refer to ACL in H3C WX3000 Series Unified
Switches Switching Engine Configuration Guide
for information about defining ACL rules.
Configuration procedure
You can collect traffic statistics or clear traffic statistics on all the packets matching specific ACL rules, or
on packets that match specific ACL rules and are of a VLAN, of a port group, or pass a port.
Follow these steps to collect traffic statistics on all the packets matching specific ACL rules:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Collect the statistics on the packets
matching specific ACL rules
traffic-statistic
inbound acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic
inbound
acl-rule
Optional
Follow these steps to collect traffic statistics on packets that are of a VLAN and match specific ACL
rules:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Collect the statistics on the packets
matching specific ACL rules
traffic-statistic vlan vlan-id
inbound
acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic vlan vlan-id
inbound
acl-rule
Optional
Follow these steps to collect traffic statistics on packets that are of a port group and match specific ACL
rules:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter port group view
port-group
group-id
—
Collect the statistics on the packets
matching specific ACL rules
traffic-statistic
inbound acl-rule
Required
Clear the statistics on the packets
matching specific ACL rules
reset traffic-statistic
inbound
acl-rule
Optional
Follow these steps to collect traffic statistics on packets passing a port and matching specific ACL rules:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface
interface-type interface-number
—