H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 501)

46-29
Figure 47-22 SSH client interface
When the Switch Acts as an SSH Client and the Authentication Type is Password
Network requirements
As shown in Figure 47-23 , establish an SSH connection between Switch A (SSH Client) and Switch B
(SSH Server) for secure data exchange. The user name for login is client001 and the SSH server’s IP
address is 10.165.87.136. Password authentication is required.
Figure 47-23 Network diagram of SSH client configuration when using password authentication
Switch B
SSH Server
Switch A
SSH Client VLAN-Interface 1
10 .165.87.137./24
10.165 .87 .136 ./24
VLAN-Interface 1
Configuration procedure
z
Configure Switch B
# Create a VLAN interface on the device and assign an IP address, which the SSH client will use as the
destination for SSH connection.
system-view
[device] interface vlan-interface 1
[device-Vlan-interface1] ip address 10.165.87.136 255.255.255.0
[device-Vlan-interface1] quit
# Generate RSA and DSA key pairs.
[device] public-key local create rsa
[device] public-key local create dsa
# Set the authentication mode for the user interfaces to AAA.