H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 320)

31-6
z
You need to specify the ports connected to the valid DHCP servers as trusted to ensure that DHCP
clients can obtain valid IP addresses. The trusted port and the port connected to the DHCP client
must be in the same VLAN.
z
You are not recommended to configure both the DHCP snooping and selective QinQ function on
the device, which may result in the DHCP snooping to function abnormally.
Configuring DHCP Snooping to Support Option 82
Enable DHCP snooping and specify trusted ports on the device before configuring DHCP snooping to
support Option 82.
DHCP-Snooping Option 82 Support Configuration Task List
Complete the following tasks to configure DHCP-snooping Option 82 support:
Task Remarks
Enable DHCP-snooping Option 82 support Required
Configure a handling policy for DHCP packets with Option 82 Optional
Configure the storage format of Option 82 Optional
Configure the circuit ID sub-option Optional
Configure the remote ID sub-option Optional
Configure the padding format for Option 82 Optional
Enable DHCP-snooping Option 82 support
Follow these steps to enable DHCP-snooping Option 82 support:
To do… Use the command… Remarks
Enter system view system-view —
Enable DHCP-snooping Option 82
support dhcp-snooping information
enable
Required
By default, DHCP snooping Option
82 support is disabled.
Configure a handling policy for DHCP packets with Option 82
Follow these steps to configure a handling policy for DHCP packets with Option 82:
To do… Use the command… Remarks
Enter system view system-view Optional