H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 48)

1-8
To do… Use the command… Remarks
Configure the command level
available to users logging in to
the user interface
user privilege level level
Optional
By default, commands of level 0 are
available to users logging in to the VTY
user interfaces.
Configure the supported
protocol protocol inbound { all | ssh |
telnet }
Optional
Both Telnet protocol and SSH protocol
are supported by default.
Set the commands to be
executed automatically after a
user login to the user interface
successfully
auto-execute command text
Optional
By default, no command is executed
automatically after a user logs into the
VTY user interface.
Make terminal services available shell
Optional
Terminal services are available in all
use interfaces by default.
Set the maximum number of
lines the screen can contain
screen-length screen-length
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set history command buffer size
history-command max-size
value
Optional
The default history command buffer size
is 10. That is, a history command buffer
can store up to 10 commands by
default.
Set the timeout time for the user
interface idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10 minutes,
the connection to a user interface is
terminated if no operation is performed
in the user interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Note that if you configure to authenticate the users in the scheme mode, the command level available to
the users logging in to the switching engine depends on the user privilege level level command and
the service-type { ftp | lan-access | { ssh | telnet | terminal }* [ level level ] } command, as listed in
Table 4-4 .
Table 4-4 Determine the command level when users logging in to the switching engine are
authenticated in the scheme mode
Scenario
Authentication
mode
User type Command
Command
level
authentication-mo
de scheme
[ command-autho
rization ] VTY users that are
AAA/RADIUS
authenticated or
locally The user privilege level level command is not
executed, and the service-type command does
not specify the available command level.
Level 0