H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 408)

41-4
To do… Use the command… Remarks
Add a user
to an SNMP
group snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
z
You can choose either of
them as needed.
Set the maximum size of an SNMP
packet for SNMP agent to receive or send snmp-agent packet max-size
byte-count
Optional
1,500 bytes by default.
Set the device engine ID
snmp-agent local-engineid
engineid
Optional
By default, the device engine ID
is “enterprise number + device
information”.
Create/Update the view information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
[ mask
mask-value ]
Optional
By default, the view name is
“ViewDefault” and OID is 1.
Configuring basic SNMP functions for SNMPv3
The device now supports the Advanced Encryption Standard (AES) for SNMPv3 to provide encryption.
AES can provide higher security than the Data Encryption Standard (DES).
Follow these steps to configure basic SNMP functions for SNMPv3:
To do… Use the command… Remarks
Enter system view system-view —
Enable SNMP agent snmp-agent
Optional
Disabled by default.
You can enable SNMP agent by
executing this command or any of
the commands used to configure
SNMP agent.
Set system information and specify
to enable SNMPv3 on the device
snmp-agent sys-info { contact
sys-contact | location sys-location
| version { { v1 | v2c | v3 }* | all } }
Required
By default, the contact information
for system maintenance is
"Hangzhou, H3C Technology Co.,
Ltd.", the system location is
"Hangzhou China", and the SNMP
version is None.
Set an SNMP group
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number
]
Required
Encrypt a plain-text password to
generate a cipher-text one
snmp-agent calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
Optional
This command is used if password
in cipher-text is needed for adding
a new user.
Add a user to an SNMP group
snmp-agent usm-user v3
user-name group-name [ cipher ]
[ authentication-mode { md5 |
sha
} auth-password
[ privacy-mode { des56 | aes128 }
priv-password
] ] [ acl acl-number ]
Required