H3C Technologies H3C WX3000 Series Unified Switches User Manual

Page 637

62-7

[SwitchA-GigabitEthernet1/0/1] poe enable

[SwitchA-GigabitEthernet1/0/1] poe max-power 12000

[SwitchA-GigabitEthernet1/0/1] quit

# Enable the PoE feature on GigabitEthernet 1/0/2, and set the PoE maximum output power of
GigabitEthernet 1/0/2 to 2500 mW.

[SwitchA] interface GigabitEthernet 1/0/2

[SwitchA-GigabitEthernet1/0/2] poe enable

[SwitchA-GigabitEthernet1/0/2] poe max-power 2500

[SwitchA-GigabitEthernet1/0/2] quit

# Enable the PoE feature on GigabitEthernet 1/0/8, and set the PoE priority of GigabitEthernet 1/0/8 to
critical.

[SwitchA] interface GigabitEthernet 1/0/8

[SwitchA-GigabitEthernet1/0/8] poe enable

[SwitchA-GigabitEthernet1/0/8] poe priority critical

[SwitchA-GigabitEthernet1/0/8] quit

# Set the PoE management mode on the device to auto (it is the default mode, so this step can be
omitted).

[SwitchA] poe power-management auto

# Enable the PD compatibility detect of the device to allow the device to supply power to part of the
devices noncompliant with the 802.3af standard.

[SwitchA] poe legacy enable