H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 260)

25-8
You can use the display connection command to view the connections of Telnet users, but you cannot
use the cut connection command to cut down their connections.
RADIUS Configuration Task List
The device can function not only as RADIUS clients but also as local RADIUS servers.
Complete the following tasks configure RADIUS for the device functioning as a RADIUS client:
Task Remarks
Creating a RADIUS Scheme Required
Configuring RADIUS Authentication/Authorization Servers Required
Configuring RADIUS Accounting Servers Required
Configuring Shared Keys for RADIUS Messages Optional
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
Optional
Configuring the Type of RADIUS Servers to be Supported Optional
Configuring the Status of RADIUS Servers Optional
Configuring the Attributes of Data to be Sent to RADIUS Servers Optional
Configuring Timers for RADIUS Servers Optional
Enabling Sending Trap Message when a RADIUS Server Goes
Down
Optional
Configuring the
RADIUS client
Enabling the User Re-Authentication at Restart Function Optional
Configuring the
RADIUS server
Refer to the configuration of the RADIUS Server. —
Complete the following tasks to configure RADIUS for the device functioning as a local RADIUS server:
Task Remarks
Creating a RADIUS Scheme Required
Configuring RADIUS Authentication/Authorization Servers Required
Configuring RADIUS Accounting Servers Required
Configuring Shared Keys for RADIUS Messages Optional
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
Optional
Configuring the Type of RADIUS Servers to be Supported Optional
Configuring the Status of RADIUS Servers Optional
Configuring the Attributes of Data to be Sent to RADIUS Servers Optional
Configuring the
RADIUS server
Configuring the network access server and shared key enabled
and allowed on the local RADIUS server
Required