H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 37)

1-2
User Interface Index
Two kinds of user interface index exist: absolute user interface index and relative user interface index.
1) The absolute user interface indexes are as follows:
z
The absolute AUX user interfaces is numbered 0.
z
VTY user interface indexes follow AUX user interface indexes. The first absolute VTY user
interface is numbered 1, the second is 2, and so on.
2) A relative user interface index can be obtained by appending a number to the identifier of a user
interface type. It is generated by user interface type. The relative user interface indexes are as
follows:
z
AUX user interfaces is numbered 0.
z
VTY user interfaces are numbered VTY0, VTY1, and so on.
Common User Interface Configuration
Follow these steps to configure common user interface:
To do… Use the command… Remarks
Lock the current user interface lock
Optional
Execute this command in user view.
A user interface is not locked by default.
Specify to send messages to all
user interfaces/a specified user
interface
send { all | number | type
number }
Optional
Execute this command in user view.
Free a user interface
free user-interface [ type ]
number
Optional
Execute this command in user view.
Enter system view system-view —
Set the banner
header [ incoming | legal |
login | shell ] text
Optional
By default, no banner is configured.
Set a system name for the
switching engine
sysname string
Optional
By default, the system name is device.
Enable copyright information
displaying
copyright-info enable
Optional
By default, copyright displaying is
enabled. That is, the copy right
information is displayed on the terminal
after a user logs in successfully.
Enter user interface view
user-interface [ type ]
first-number [ last-number ]
—
Display the information about
the current user interface/all
user interfaces
display users [ all ]
Display the physical attributes
and configuration of the
current/a specified user
interface
display user-interface [ type
number | number ]
Display the information about
the current web users
display web users
Optional
You can execute the display command
in any view.