Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 89
77
Figure 46 Configuring the wireless card (III)
5.
Verify the configuration:
{
The client can pass 802.1X authentication and associate with the AP.
{
You can use the display wlan client verbose command, display connection command, and
display dot1x command to view the online clients.
Dynamic WEP encryption-802.1X authentication configuration
example
Network requirements
As shown in
, an AC with IP address 10.18.1.1, an AP, and a RADIUS server with IP address
10.18.1.88 are connected through a Layer 2 switch. Perform dynamic WEP encryption.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points