H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 61

[AC1] port-security enable

# Enable EAP authentication mode.

[AC1] dot1x authentication-method eap

# Configure port security on interface WLAN-ESS 1.

[AC1] interface wlan-ess 1

[AC1-WLAN-ESS1] port-security port-mode userlogin-secure-ext

[AC1-WLAN-ESS1] port-security tx-key-type 11key

[AC1-WLAN-ESS1] undo dot1x multicast-trigger

[AC1-WLAN-ESS1] undo dot1x handshake

[AC1-WLAN-ESS1] quit

# Define a crypto type WLAN service template, configure the SSID as abc, and bind the

WLAN-ESS interface to this service template.

[AC1] wlan service-template 1 crypto

[AC1-wlan-st-1] ssid abc

[AC1-wlan-st-1] bind wlan-ess 1

[AC1-wlan-st-1] authentication-method open-system

[AC1-wlan-st-1] cipher-suite ccmp

[AC1-wlan-st-1] security-ie rsn

[AC1-wlan-st-1] service-template enable

[AC1-wlan-st-1] quit

# Create an AP template named ap1, and specify its model as WA2100, and serial ID as
210235A045B05B1236548.

[AC1] wlan ap ap1 model WA2100

[AC1-wlan-ap-ap1] serial-id 210235A045B05B1236548

[AC1-wlan-ap-ap1] radio 1 type dot11g

# Bind service template 1 to radio 1.

[AC1-wlan-ap-ap1-radio-1] service-template 1

[AC1-wlan-ap-ap1-radio-1] radio enable

[AC1-wlan-ap-ap1-radio-1] quit

[AC1-wlan-ap-ap1] quit

# Configure mobility group abc and enable the mobility group.

[AC1] wlan mobility-group abc

[AC1-wlan-mg-abc] source ip 10.18.1.1

[AC1-wlan-mg-abc] member ip 10.18.1.2

[AC1-wlan-mg-abc] mobility-group enable

[AC1-wlan-mg-abc] return

# Configure AP group 1, add AP 1 and AP 2 in it, apply it in user profile management, and enable
the user profile.

system-view

[AC1] wlan ap-group 1

[AC1-ap-group1] ap ap1 ap2

[AC1-ap-group1] quit

[AC1] user-profile management

[AC1-user-profile-management] wlan permit-ap-group 1

[AC1-user-profile-management] quit

[AC1] user-profile management enable

Configure AC 2:

This manual is related to the following products: