H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 79)

67
Figure 33 Adding account
3. Configure the RADIUS server (IMCv5):
NOTE:
The following takes the IMC (the IMC versions are IMC PLAT 5.0 and IMC UAM 5.0) as an example to
illustrate the basic configurations of the RADIUS server.
# Add an access device.
a. Log in to the IMC Platform.
b. Click the Service tab, and then select User Access Manager > Access Device Management >
Access Device from the navigation tree to enter the access device configuration page.
c. Click Add on the page to enter the configuration page as shown in Figure 34 :
d. Input 12345678 as the Shared Key. Keep the default values for other parameters.
e. Select or manually add the access device with the IP address 10.18.1.1.
Figure 34 Adding access device
# Add service.
a. Click the Service tab, and then select User Access Manager > Service Configuration from the
navigation tree to enter the add service page.