beautypg.com

Symptom, Analysis, Solution – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 199: Configuration download failed for mp

background image

187

3.

Enter MP policy view and use command undo role-authenticator enable to set the device not to

play the role of an authenticator.

4.

Enable all the radios.

Configuration download failed for zeroconfig device

Symptom

A zero-configuration device forms links but configuration download does not happen.

Analysis

Channel configuration may be wrong.

The mapped mesh profile may be wrong.

Solution

1.

Go to radio view and use command display this.

2.

Verify that the channel must be the same as the MPP. If not, change the channel using command
channel.

3.

Verify that the mesh profile mapped to the radio is the same as that mapped to the MPP's radio.
If not, unmap the current mesh profile using command undo mesh-profile. Then map the correct

mesh profile by using command mesh-profile.

Configuration download failed for MP

Symptom

A mesh profile is mapped to the radio of an MP but configuration is not downloaded to the MP.

Analysis

Verify that the security configuration has been made.

Verify that the mapped mesh profile is enabled.

Verify that the radio is enabled.

Solution

1.

Configure the security parameters.

2.

Enable the mapped mesh profile by using command mesh-profile enable.

3.

Enable the radio by using command radio enable.

Debug error: neither local nor remote is connected to MKD

Symptom

Debug error: Neither local nor remote is connected to MKD.

Analysis

Check if MKD service is enabled for the mapped mesh profile.

Solution

Enable the MKD service for the mesh profile by using command mkd-service enable.