Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 106

Figure 57 Network diagram

Configuration procedure

NOTE:
•

For wireless service configuration, see "WLAN service configuration." A client has inter-AC fast
roaming capability only if it uses 802.1X (RSN) authentication through negotiation.

•

If you select an authentication mode involving remote authentication, you need to configure the
corresponding RADIUS server. For more information, see "WLAN security configuration."

Configure AC 1:
# On interface WLAN-ESS 1, configure port security mode as userlogin-secure-ext, and enable key
negotiation of the 11key type.

system-view

[AC1] interface wlan-ess 1

[AC1-WLAN-ESS1] port-security port-mode userlogin-secure-ext

[AC1-WLAN-ESS1] port-security tx-key-type 11key

# Disable the multicast trigger function and the online user handshake function.

[AC1-WLAN-ESS1] undo dot1x multicast-trigger

[AC1-WLAN-ESS1] undo dot1x handshake

[AC1-WLAN-ESS1] quit

# Create service template 1 of crypto type, configure its SSID as inter-roam, and bind

WLAN-ESS1 to inter-roam.

[AC1] wlan service-template 1 crypto

[AC1-wlan-st-1] ssid inter-roam

[AC1-wlan-st-1] bind wlan-ess 1

AC 1

L2 Switch

Client

AP 1

AP 2

Roaming

VLAN 1

AC 2

RADIUS server

10.18.1.5/24

10.18.1.1/24

10.18.1.2/24

This manual is related to the following products:

H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points