H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 13)

1
Configuring WLAN interfaces
WLAN-ESS interface
The interface that allows the wireless local area net to cover all the WLAN-ESS interfaces is a virtual Layer
2 interface. This interface operates like Layer 2 access Ethernet ports with Layer 2 attributes. It also
supports multiple Layer 2 protocols. A WLAN-ESS interface can also be used as a template for
configuring WLAN-DBSS interfaces. A WLAN-DBSS interfaces created on a WLAN-ESS interface
adopts the configuration of the WLAN-ESS interface.
Entering WLAN-ESS interface view
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter WLAN-ESS interface
view. interface wlan-ess
interface-number
If the WLAN-ESS interface does not
exist, this command creates the
WLAN-ESS interface first.
3. Restore the default settings of
the WLAN-ESS interface.
default Optional
Configuring a WLAN-ESS interface
You can configure the description of a WLAN-ESS interface and assign the interface to a common VLAN
or multicast VLAN. This section provides general information on features supported on WLAN-ESS
interfaces. For more information about these features and commands, see the corresponding chapters in
the configuration guide and command reference.
To configure a WLAN-ESS interface:
Step Command
1. Configure the description of the interfaceN/A description
2. Configure the VLAN.
• port access vlan
• port hybrid vlan
• port hybrid pvid vlan
• port link-type
3. Configure multicast.
• Configure multicast VLAN:
port multicast-vlan
• Configure IPv6 multicast VLAN:
port multicast-vlan ipv6
4. Configure a MAC authentication guest VLAN. mac-authentication guest-vlan